|140mm Spacing between controls. 100mm version also available.
Thermostatic shower valve with 2 chrome dials for control of temperature, water flow and output to various functions of the shower or steam shower cabin.
The outputs are push fit and designed for the outlet hoses to be connected with jubilee clips. The water input ports are also 15mm threaded and require balanced water pressures.
Please Note - The valve does not have a cold water output to connect to a steam generator - Our 15mm Brass T-Piece can be purchased separately if required.
The valve required water pressures between 1-3 bar balanced and a minimum flow of 7.5 litres per minute to operate.
Distance between valve body sections is 140mm centres.
Top Fitting (hole size in panel): 20 mm
Bottom Fitting (hole size in panel): 42 mm
Please note this is suitable for Colorspa Shower Cabins & Steam Cabins.
This valve comes with a pre-fitted Thermostatic Cartridge.
AquaLusso have produced this guide for replacing a Valve in thier showers:
Please note our valves can arrive 'wet', this is not because they have been used, but simply that they are tested after production and occasionally water remains inside the item, with can find it way out whilst passing through the postal system on its way to you.