|3, 4 & 6 Outlet versions also available from stock
Thermostatic shower valve with 3 chrome dials for control of temperature, water flow and output to various functions of the shower or steam shower cabin.
The outputs are push fit type requiring jubilee type clips to fix. The water input ports are 15mm threaded and require balanced water pressures. The valve also has a cold water output to connect to a steam generator - this can be capped off for non steam showers if not required.
The valve required water pressures between 1-3 bar balanced and a minimum flow of 7.5 litres per minute to operate.
Distance between valve body sections is 100mm centres.
Fixing Hole Diameters:
Upper Hole: 30mm
Middle Hole: 30mm
Lower Hole: 45mm
This valve comes with a pre-fitted Thermostatic Cartridge.
The video below is produced by AquaLusso and is useful for those replacing valve in similar products.
Please note our valves can arrive 'wet', this is not because they have been used, but simply that they are tested after production and occasionally water remains inside the item, with can find it way out whilst passing through the postal system on its way to you.