 Deluxe, Touch Screen Control Pad for replacement in Steam Showers with the same pad. This pad fits into a cut out of 155mm x 110mm and provides touch screen control to steam, lights, fan, radio etc.
Known compatible models feature manufacturers codes: 8004d, 8004, 8004a, 9008, 8002, 8002a, 8002d, bh02, bh04 (from models sold by Bathtek, Brownes Health, Cascada, AquaLusso, Bath Depot, BPS etc.)
Product Code: PR8902
INSTALLATION
Fitting of this item is as simple as removing the 4 fixing bolts holding the pad in place and pushing the pad into the shower cabin from the rear of the shower. Clean the area of any silicone used to provide water protection, apply a new bead of sealant to bed the pad into, place the pad in position, re-fasten the bolts and connect the data lead. Clean up any excess sealant and power the system back up.
UPGRADING YOUR CONTROL PAD
When replacing control pads you MUST replace with the same pad as the connections from the pad can be different to those on the steam generator or electronics. Additionally the data communication to and from the generator must correspond (think of it like pointing a television remote at a different Make/Model of television, the remote would not control the television correctly)
If you wish to upgrade your control pad to a later generation, then you MUST purchase a corresponding steam generator system. This may require modification to the tower panel of your shower to house the control pad that may be a slightly different shape or size.
|
