|The TR001 is a slim styled electronic control apd. It enables control of steam timer, radio (tuning and volume) lights, etc.
The TR001 requires a fitting hole dimension of: 155mm x 55mm
Fitting of this item is as simple as removing the 4 fixingbolts holding the pad in place and pushing the pad into the shower cabin fromthe rear of the shower. Clean the area of any silicone used to provide waterprotection, apply a new bead of sealant to bed the pad into, place the pad inposition, re-fasten the bolts and connect the data lead. Clean up any excesssealant and power the system back up.
UPGRADING YOUR CONTROL PAD
When replacing control pads you MUST replace with the same pad as the connectionsfrom the pad can be different to those on the steam generator or electronics.Additionally the data communication to and from the generator must correspond (think of it like pointing a television remote at a different Make/Model of television, the remote would not control the television correctly)
If you wish to upgrade your control pad to a later generation, then you MUSTpurchase a corresponding steam generator system. This may require modificationto the tower panel of your shower to house the control pad that may be aslightly different shape or size.