top of page
TR019 Steam Shower Control Pad

TR019 Steam Shower Control Pad


The TR019 is a slim styled electronic control pad. It enables control of steam timer, radio (tuning and volume) lights, etc.

The TR019 requires a fitting hole dimension of: TBC

This item is for connection to TR019 Steam Generator only and cannot be connected to other types of electronics or generators.


Please note control pads must be fitted with corresponding steam generator and electronics.

Connections are either single round or twin multi-pin as shown in the images. The standard connection being twin-multi which is also compatible with all of our TR019 steam generators and all-in-one TR019 steam/electronics models

Fitting of this item is as simple as removing the 4 fixing bolts holding the pad in place and pushing the pad into the shower cabin from the rear of the shower. Clean the area of any silicone used to provide water protection, apply a new bead of sealant to bed the pad into, place the pad in position, re-fasten the bolts and connect the data lead. Clean up any excess sealant and power the system back up.

When replacing control pads you MUST replace with the same pad as the connections from the pad can be different to those on the steam generator or electronics. Additionally the data communication to and from the generator must correspond (think of it like pointing a television remote at a different Make/Model of television, the remote would not control the television correctly)

If you wish to upgrade your control pad to a later generation, then you MUST purchase a corresponding steam generator system. This may require modification to the tower panel of your shower to house the control pad that may be a slightly different shape or size.

    bottom of page